User's Manual

Table Of Contents
All doors in the group will be unlocked (no maer closed or open). All the persons can access
the doors with no credenals required.
Remain All Locked
All doors in the group will be closed and locked. No person can access the doors even if
he/she has the authorized credenals, except the super users.
Capture
Capture a picture manually.
Note
The Cap
ture buon is available when the device supports capture funcon. The picture is
saved in the PC running the client. For seng the saving path, refer to Set File Saving Path in
the user manual of the client soware.
Result
The ic
on of the doors will change in real-me according to the operaon if the operaon is
succeeded.
10.10 Event Center
The event informaon (for example, device oine) received by the client displays. In the Event
Center, you can check the detailed informaon of the real-me and historical events, view the
event linked video, handle the events, and so on.
Before the client can receive the event informaon from the device, you need to enable the events
of the r
esource and arm the device rst. For details, refer to
Enable Receiving Event from Devices .
10.10.1 Enable Receiving Event from Devices
Before the client
soware can receive event nocaons from the device, you need to arm the
device rst.
Steps
1.
Click
→ Tool → Device Arming Control to open Device Arming Control page.
All the added devices appear on this page.
2.
Oponal: If ther
e are to many devices, enter the key words in Filter led to lter the device(s)
you want.
Note
For the ltered devices, you can click Arm All
or Disarm All to enable receiving event of these
devices.
3.
In the Aut
o-Arming column, turn on the switch to enable auto-arming.
DS-K6300 Series Payment Terminal User Manual
134