User's Manual

5.
Set the sector ID.
Note
●
The sect
or ID ranges from 1 to 100.
●
By default, Sector 13 is encrypted. It is recommended to encrypt sector 13.
6.
Click Sa
ve to save the sengs.
10.8 Congure Linkage Acons for Access Control
You can congure dierent linkage acons for the event detected by the access control device.
Aer that, linkage acons will be triggered once the event happens. This mechanism is used for
nofying the security personnel the event, or triggering automac access control in real me.
Two types of linkage acons are supported:
●
Client Acons: When the event is detected, it will trigger the acons on the client, such as the
client making an audible warning..
●
Device Acons: When the event is detected, it will trigger the acons of a specic device, such
as buzzing of a card reader and, opening/closing of a door, ..
10.8.1 Congure Client Acons for Access Event
Even if you are far away from an access point, you can sll know what happens and how urgent the
event is via the client by conguring client acons for the access event. Client acons here refer to
the acons
automacally executed by the client itself, such as making an audible warning and
sending an email. Once an event is triggered, the client will nofy the security personnel, so that
he/she can handle the event in me.
Before You Start
Add access control device to the client.
Steps
1.
Click Event Conguraon → Access Con
trol Event .
The added access control devices will display in the device list.
2.
Select a resource (including device, alarm input, door, and card reader) from the device list.
The event types which the selected resource supports appear.
3.
Select the event(s) and click Edit Priority to dene the priority for the event(s), which can be
used t
o lter events in the Event Center.
4.
Set the linkage acons of the event.
1) Select the event(s) and click Edit Linkage to set the client acons when the event(s) are
triggered.
Audible Warning
DS-K6300 Series Payment Terminal User Manual
129