User's Manual

Table Of Contents
Figure 10-12 Set Authencaon Modes for Card Readers
6.
Oponal: Select a congured day and click Cop
y to Week to copy the same sengs to the whole
week.
7.
Oponal: Click Copy to to copy the sengs to other card readers.
8.
Click Save.
10.7.7 Congure First Person In
You can set mulple rst persons for one access control point. Aer the rst person is authorized,
it allo
ws mulple persons access the door or other authencaon acons.
Before You Start
Set the access group and apply the access group to the access control device. For details, refer to
Set Access Group to Assign Access Authorizaon to Persons .
P
erform this task when you want to congure opening door with rst person.
Steps
1.
Click Access Control → Advanced Funcon → Fir
st Person In to enter the First Person In page.
2.
Select an access control device in the list on the le panel.
3.
Select the current mode as Enable Remaining Open aer First Person or Disable Remaining
Open aer First Person from the drop-down list for each access control point of the selected
device.
Enable Remaining Open aer First Person
DS-K6300 Series Payment Terminal User Manual
121