User's Manual

4. Enable a group of
aendance status.
Note
The Aendance Property will not be changed.
5.
Oponal: Select an status and change its name if required.
6. Set the status' schedule. Refers to Time
Sengs for details.
Result
On the inial page and authencate. The authencaon will be marked as the congured
aendance status according to the schedule. If you tap the edit icon on the result tab, you can
select a status to take
aendance manually, the authencaon will be marked as the edited
aendance status.
Example
If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's
authencaon from Monday 11:00 to 12:00 will be marked as break.
8.5.18 Set Video Intercom Parameters
The device can be used as a door staon, outer door staon, or access control device. You should
set the device No. before usage.
Click
Conguraon → Video Intercom → Device No. .
If set the device type as Door
Staon, Outer Door Staon, Access Control Device, you can set the
period No., building No., unit No., oor No., door staon No., and community No.
Click Save to save the sengs aer the conguraon.
Figure 8-12 Device No. Sengs
Face Recognion Terminal User Manual
81