User's Manual

schedule repeats, the shi type, break sengs, and the card swiping rule.) to the shi group to
dene the aendance parameters for the persons in the shi group.
Disable Aendance Mode via Web
Disable the aendance mode and the system will not display the aendance status on the inial
page.
Steps
1. Click
Conguraon → Aendance to enter the sengs page.
2. Set the Aendance Mode as Disable.
Result
You will not view or congure the aendance status on the inial page. And the system will follow
the
aendance rule that congured on the plaorm.
Time
Sengs
Steps
1. Click
Conguraon → Time Sengs to enter the sengs page.
2. Select Status Type.
3. Oponal: Edit Schedule Name according to the actual needs.
4. Drag mouse to set the schedule.
Note
Set the schedule from Monday to Sunday according to the actual needs.
5. Oponal: Select a meline and click Delete. Or click Delete All to clear the sengs.
6. Click Save.
Set Manual
Aendance via Web
Set the aendance mode as manual, and you should select a status manually when you take
aendance.
Before You Start
Add at least one user, and set the user's authencaon mode. For details, see User Management.
Steps
1. Click Conguraon → Aendance to enter the sengs page.
2. Set the
Aendance Mode as Manual.
3. Enable the Aendance Status Required and set the aendace status lasts duraon.
4. Enable a group of aendance status.
Face Recognion Terminal User Manual
79