User's Manual

Note
The input cercate ID cannot be the same as the exisng ones.
3. Upload a
cercate le from the local.
4. Click Install.
8.5.10 Change Administrator's Password
Steps
1. Click Conguraon → User Management .
2. Click .
3. Enter the old password and create a new password.
4.
Conrm the new password.
5. Click OK.
Cauon
The password strength of the device can be automacally checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can
beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
8.5.11 View Device Arming/Disarming Informaon
View device arming type and arming IP address.
Go to Conguraon → Arming/Disarming Informaon .
You can view the device arming/disarming
informaon. Click Refresh to refresh the page.
8.5.12 Network
Sengs
Set TCP/IP, port, Wi-Fi, report strategy, plaorm access and HTTP listening.
Note
Wi-Fi funcon may vary according to dierent models. Please refer to the actual device.
Face Recognion Terminal User Manual
70