User's Manual

Margin (Boom)
The distance percentage from the face boom side to the boom margin in the recognion
area.
The actual distance percentage should be larger than the congured value when face picture
authencaon. Other percentages, distances, and angles should also meet their condions.
Pupillary Distance
The minimum
resoluon between two pupils when face recognion.
The actual resoluon should be larger than the congured value.
Score
The device will score the captured picture according to the yaw angle, pitch angle, and
pupillary distance. If the score is less than the congured value, face recognion will be
failed.
You can set the face picture parameters when
authencang.
4. Click Save.
9.14.15
Congure Supplement Light Parameters
You can turn on or o the supplement light. You can also adjust the supplement light brightness.
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Click to enter the remote conguraon page.
3. Click Other → Supplement Light Parameters to enter the
Conguring Supplement Light
Parameters page.
4. Select a supplement light type from the drop-down list.
5. Select a supplement light mode from the drop-down list.
6.
Oponal: Set the supplement light brightness.
7. Click Save to save the
sengs.
9.14.16 Set Device No.
Set the device type, community No., building No., oor No., and unit No., and room No.
Click Maintenance and Management → Device to enter the device list.
Click
to enter the remote conguraon page.
Click Other → No.
Sengs and Set the device type, community No., building No., oor No., and
unit No., and No.
Face Recognion Terminal User Manual
194