User's Manual

Disable
Aer enabled, the client will not download the rmware package and upgrade even if the
client detects a new version of the client.
Prompt Me If Download and Upgrade
Aer the client detects a new version of the device, it will prompt the user whether to
download the rmware package and upgrade.
Download and Prompt Me If Upgrade
Aer the client detects the new version of the device, it will download the rmware
package automacally, and prompt the user whether to upgrade.
Download and Prompt Automacally
Aer the client detects the new version of the devices, it will download the rmware
package and upgrade the new version automacally.
You need to set a schedule in the Upgrade Time eld, during which the client upgrades
the new version
automacally.
4. Click Save.
9.12.2 Set Picture Storage
The pictures, captured by the camera of video access control terminal, triggered by events, can be
saved in the PC running the Guarding Vision Service. You can set the picture storage
locaon here
manually.
Steps
1. Enter the System Conguraon module.
2. Click Event Picture Storage.
3. Set the Store Pictures in Server switch to on.
All the disks of the PC running the Guarding Vision service will show.
4. Select the disk to save the pictures.
Note
The default saving path is: Disk/Guarding VisionalarmPicture
5. Click Save.
9.12.3 Set Alarm Sound
When the event is triggered, the client can give an audible warning to
nofy the security
personnel. You can set the sound of the audible warning in this secon.
Steps
1. Open the System Conguraon page.
Face Recognion Terminal User Manual
182