User's Manual

Start Time / End Time
Set the me when the break starts and ends.
No Earlier Than / No Later Than
Set the earliest swiping me for starng break and the latest swiping me for ending break.
Break Duraon
The duraon from start me to end me of the break.
Calculaon
Auto Deduct
The break duraon will be automacally calculated as 60 minutes.
Must Check
The break duraon will be calculated and excluded from work hours according to actual
check-in and check-out me.
Return from Break Early for
The actual check-in and check-out me does not exceed the break me, and can be
marked as normal work or work
overme.
Return from Break Late for
The actual check-in and check-out me exceeds the break me, and can be marked as
late, absent or early leave.
Calculated by
Each Check in/out: Each check-in
me and check-out me is valid and the sum of all
periods between adjacent check-in and check-out me will be recorded as the break
me duraon.
First In & Last Out: The rst check-in me is recorded as start break me and the last
check-out
me is recorded as the end break me.
Enable T&A Status
Set Enable T&A Status switch to on to calculate the actual break me according to
aendance status on the device.
Note
This funcon should be supported by the device.
Valid Authencaon Interval
During the valid authencaon interval, person swiping card for several mes will only
be calculated as once when calculang aendance data.
6. Click Save to save the sengs.
7. Oponal: Click Add to connue adding break me.
Face Recognion Terminal User Manual
165