User's Manual

Steps
1. Enter Person module.
2. Select a parent
organizaon in the le column and click Add in the upper-le corner to add an
organizaon.
3.
Create a name for the added organizaon.
Note
Up to 10 levels of organizaons can be added.
4. Oponal: Perform the following operaon(s).
Edit Organizaon Hover the mouse on an added organizaon and click to edit its
name.
Delete
Organizaon
Hover the mouse on an added organizaon and click to delete it.
Note
• The lower-level
organizaons will be deleted as well if you delete an
organizaon.
• Make sure there is no person added under the organizaon, or the
organizaon cannot be deleted.
Show Persons in
Sub Organizaon
Check Show Persons in Sub Organizaon and select an organizaon to
show persons in its sub organizaons.
9.4.2 Congure Basic Informaon
You can add person to the client one by one and congure the person's basic informaon such as
name, gender, email, phone number, etc.
Steps
1. Enter Person module.
Note
For the rst me you enter Person module, a window pops up, and you can set the rules to
generate person ID (leers and numbers supported) when adding person. When geng person
informaon from device, if there are no person IDs, the person IDs will be generated according
to the rule.
2. Select an organizaon in the organizaon list to add the person.
3. Click Add to open the adding person window.
The Person ID will be generated
automacally.
4. Enter the basic informaon including person name, gender, telephone number, email address,
validity period, etc.
Face Recognion Terminal User Manual
111