User's Manual

2. Click Device tab on the top of the right panel.
The added devices are displayed on the right panel.
Figure 9-5 Add Device by IP Address or Domain Name
3. Click Add to open the Add window, and then select IP/Domain as the adding mode.
4. Enter the required
informaon.
Name
Create a descripve name for the device. For example, you can use a nickname that can
show the
locaon or feature of the device.
Address
The IP address or domain name of the device.
Port
The devices to add share the same port number. The default value is 8000.
User Name
Enter the device user name. By default, the user name is admin.
Password
Face Recognion Terminal User Manual
102