User's Manual

Note
If you select 5.0 as the version, you should set the ISUP key as well.
5. Click Save.
Congure HTTP Listening
The device can send alarm informaon to the desnaon IP or host via HTTP protocol/HTTPS
protocol.
Before You Start
The desnaon IP or host name should support the HTTP protocol/HTTPS protocol to receive the
alarm informaon.
Note
The funcon should be supported by the device.
Steps
1. Click Conguraon → Network → Advanced → HTTP Listening .
2. Edit the desnaon IP or host name, URL and port.
3. Oponal: Click Test to test whether the entered IP address or host name are valid.
4.
Oponal: Click Default to reset the desnaon IP or host name.
5. Click Save.
8.5.13 Set Video and Audio Parameters
Set the image quality, resoluon, and the device volume.
Set Video Parameters
Click Conguraon → Video/Audio → Video .
DS-K1T643 Series Face Recognion Terminal User Manual
72