User's Manual

• +
idenes the posive terminal(s) of equipment which is used with, or generates direct current.
- idenes the negave terminal(s) of equipment which is used with, or generates direct current.
• CAUTION: This bracket is intended for use only with DS-K1T341BMI-T/DS-K1T341BMWI-T face
recognion terminal. Use with other equipment may result in instability causing injury.
• CAUTION: This equipment is for use only with the corresponded bracket. Use with other (carts,
stands, or carriers) may result in instability causing injury.
• To prevent possible hearing damage, do not listen at high volume levels for long periods.
Cauons:
• Provide a surge suppressor at the inlet opening of the equipment under special condions such
as the mountain top, iron tower, and forest.
• No naked
ame sources, such as lighted candles, should be placed on the equipment.
• The serial port of the equipment is used for debugging only.
• Burned
ngers when handling the back panel. Wait one-half hour aer switching o before
handling the parts.
•
1. Install the equipment according to the instrucons in this manual.
2. To prevent injury, this equipment must be securely
aached to the oor/wall in accordance
with the installaon instrucons.
• This equipment is for use only with specic bracket. Use with other (carts, stands, or carriers)
may result in instability causing injury.
• Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnesm radiaon. Avoid the equipment installaon on vibraons surface or places
subject to shock (ignorance can cause equipment damage).
• Install the equipment according to the
instrucons in this manual. To prevent injury, this
equipment must be securely
aached to the oor/wall in accordance with the installaon
instrucons.
• Do not place the device in extremely hot (refer to the specicaon of the device for the detailed
operang temperature), cold, dusty or damp locaons, and do not expose it to high
electromagnec radiaon.
• The device cover for indoor use shall be kept from rain and moisture.
• Exposing the equipment to direct sun light, low venlaon or heat source such as heater or
radiator is forbidden (ignorance can cause
re danger).
• Do not aim the device at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a
malfuncon however), and aecng the endurance of sensor at the
same me.
• Please use the provided glove when open up the device cover, avoid direct contact with the
device cover, because the acidic sweat of the ngers may erode the surface coang of the device
cover.
• Use only power supplies listed in the user manual or user
instrucon.
• Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do
not use alkaline detergents.
DS-K1T643 Series Face Recognion Terminal User Manual
vii