User's Manual

Table Of Contents

7.12.2 Call Center from Device

Steps

1. Get the client

soware from the supplied disk or the ocial website, and install the soware

according to the prompts.

2. Run the client

soware and the control panel of the soware pops up.

3. Click Device Management to enter the Device Management interface.

4. Add the main

staon and the device to the client soware.

Note

For details about adding device, see Add Device.

5. Set the main staon's IP address and SIP address in the remote conguraon page.

Note

For details about the operaon, see the user manual of the main staon.

6. Tap → to call the center.

7. Answers the call via the main staon and starts two-way audio.

Note

The device will call the main staon in priority.

7.12.3 Call Device from Client Soware

Steps

1. Get the client soware from the supplied disk or the ocial website, and install the soware

according to the prompts.

2. Run the client soware and the control panel of the soware pops up.

3. Click Device Management to enter the Device Management page.

4. Add the device to the client

soware.

Note

For details about adding device, see Add Device.

5. Enter the Live View page and double-click the added device to start live view.

Note

For details about operaons in the Live View page, see Live View in the user manual of the

client soware.

6. Right click the live view image to open the right-click menu.

7. Click Start Two-Way Audio to start two-way audio between the device and the client

soware.

DS-K1T643 Series Face Recognion Terminal User Manual