User's Manual

Note
If you do not select a status, the authencaon will be failed and it will not be marked as a valid
aendance.
7.10.3 Set Auto Aendance via Device
Set the aendance mode as auto, and you can set the aendance status and its available schedule.
The system will automacally change the aendance status according to the congured schedule.
Before You Start
Add at least one user, and set the user's
authencaon mode. For details, see User Management.
Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the
Aendance Mode as Auto.
Figure 7-15 Auto Aendance Mode
3. Enable the Aendance Status funcon.
4. Enable a group of aendance status.
Note
The Aendance Property will not be changed.
5. Oponal: Select an status and change its name if required.
DS-K1T643 Series Face Recognion Terminal User Manual
51