User's Manual

Select a Wi-Fi and enter the Wi-Fi's password to get connected.
Or tap Add Wi-Fi and enter the Wi-Fi's name and the password to get connected.
3.
Oponal: Tap Skip to skip network sengs.
6.3 Set Administrator
Aer device acvaon, you can add an administrator to manage the device parameters.
Before You Start
Acvate the device and select an applicaon mode.
Steps
1. Oponal: Tap Skip to skip adding administrator if required.
2. Enter the administrator's name (oponal) and tap Next.
Figure 6-3 Add Administrator Page
DS-K1T643 Series Face Recognion Terminal User Manual
24