User's Manual

Note
• You can also change the
sengs in System Sengs.
• If you install the device indoors near the window or the face recognion funcon is not
working well, select Others.
• If you do not
congure the applicaon mode and tap Next, the system will select Indoor by
default.
• If you
acvate the device via other tools remotely, the system will select Indoor as the
applicaon mode by default.
6.2 Set Network Parameters
Aer
acvaon and select applicaon mode, you can set the network for the device
Steps
1. When you enter the Select Network page, tap Wired Network or Wi-Fi for your actual needs.
DS-K1T643 Series Face Recognion Terminal User Manual
22