User's Manual

Note
Make sure the 2 sheets on each side of the mounng plate have been in the holes at the back of
the device.
7. Use 2 supplied M3*8 screws to secure the device and the mounng plate.
Figure 3-3 Secure Device
3.3 Install without Gang Box
Steps
Note
The addional force shall be equal to three mes the weight of the equipment. The equipment ad
its associated mounng means shall remain secure during the installaon. Aer the installaon,
the equipment, including any associated mounng plate, shall not be damaged.
1. According to the datum line on the mounng template, sck the mounng template on the wall
or other surfaces, 1.4 meters higher than the ground.
DS-K1T643 Series Face Recognion Terminal User Manual
7