User's Manual

Chapter 1 Overview
1.1 Overview
The face recognion terminal is a kind of access control device integrated with temperature
screening funcon. It can fast taking skin-surface temperature and upload abnormal temperature
event to the center, which can be widely applied in mulple scenarios, such as enterprises,
staons, dwellings, factories, schools, campus and so on.
1.2 Features
• Supports Vanadium Oxide uncooled sensor to measure target's temperature
• Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 °C, deviaon:
± 0.5 °C without black body calibraon
• Recognion distance: 0.3 to 2 m
• Fast temperature measurement mode: Detects face and takes skin-surface temperature without
identy authencaon.
• Mulple authencaon modes are available: card and temperature, face and temperature, card
and face and temperature, etc.
• Face mask wearing alert
If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the
same
me, the authencaon or aendance is valid.
• Forced mask wearing alert
If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the
same
me, the authencaon or aendance will be failed.
• Displays temperature measurement results on the
authencaon page
• Triggers voice prompt when detecng abnormal temperature
•
Congurable door status (open/close) when detecng abnormal temperature
• Transmits online and oine temperature informaon to the client soware via TCP/IP
communicaon and saves the data on the client soware
• Face recognion duraon ＜ 0.2 s/User; face recognion accuracy rate ≥ 99%
• 6000 face capacity, 10,000 card capacity, and 150,000 event capacity
• Suggested height for face
recognion: between 1.4 m and 1.9 m
• Supports 6
aendance status, including check in, check out, break in, break out, overme in,
overme out
• Watchdog design and tamper funcon
• Audio prompt for authencaon result
• NTP, manually me synchronizaon, and auto synchronizaon
• Connects to external access controller or Wiegand card reader via Wiegand protocol
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the
terminal is destroyed
DS-K1T643 Series Face Recognion Terminal User Manual
1