User Manual

70
Steps
1. Go to Configuration System System Settings RS-485.
2. Set the RS-485 parameters.
Note
You should keep the parameters of the device and the computer or terminal all the same.
3. Click Save.
Set the same temperature unit and distance unit. When you enable this function, the unit cannot be configured separately in other
setting pages
Steps
1. Go to Configuration System System Settings Unit Settings.
2. Check Use Same Unit.
3. Set the temperature unit and distance unit.
4. Click Save.
You can improve system security by setting security parameters.
I. Authentication
You can improve network access security by setting RTSP and WEB authentication.
Go to Configuration System Security Authentication to choose authentication protocol and method according to your needs.
RTSP Authentication
Digest and digest/basic are supported, which means authentication information is needed when RTSP request is sent to the device.
If you select digest/basic, it means the device supports digest or basic authentication. If you select digest, the device only supports
digest authentication.
RTSP Digest Algorithm
MD5, SHA256 and MD5/SHA256 encrypted algorithm in RTSP authentication. If you enable the digest algorithm except for MD5,
the third-party platform might not be able to log in to the device or enable live view because of compatibility. The encrypted
algorithm with high strength is recommended.
WEB Authentication
Digest and digest/basic are supported, which means authentication information is needed when WEB request is sent to the device.
If you select digest/basic, it means the device supports digest or basic authentication. If you select digest, the device only supports
digest authentication.
WEB Digest Algorithm
MD5, SHA256 and MD5/SHA256 encrypted algorithm in WEB authentication. If you enable the digest algorithm except for MD5,
the third-party platform might not be able to log in to the device or enable live view because of compatibility. The encrypted
algorithm with high strength is recommended.
Note
Refer to the specific content of protocol to view authentication requirements.