User Manual

3
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.
Laws and Regulations
● Use of the product must be in strict compliance with the local electrical safety regulations.
Transportation
● Keep the device in original or similar packaging while transporting it.
● Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need to return the device to the factory
with the original wrapper. Transportation without the original wrapper may result in damage on the device and the company shall
not take any responsibilities.
● Do not drop the product or subject it to physical shock. Keep the device away from magnetic interference.
Power Supply
● Input voltage should meet the Limited Power Source (Detector: 12 VDC, camera: 12 VDC, 24 VAC, or PoE(802.3af) according to
the IEC61010-1 standard. Please refer to technical specifications for detailed information.
● Make sure the plug is properly connected to the power socket.
● DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused by overload.
Battery
● Improper use or replacement of the battery may result in explosion hazard. Replace with the same or equivalent type only. Dispose
of used batteries in conformance with the instructions provided by the battery manufacturer.
● The built-in battery cannot be dismantled. Please contact the manufacture for repair if necessary.
● For long-term storage of the battery, make sure it is fully charged every half year to ensure the battery quality. Otherwise, damage
may occur.
Maintenance
● If the product does not work properly, please contact your dealer or the nearest service center. We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.
● A few device components (e.g., electrolytic capacitor) require regular replacement. The average lifespan varies, so periodic
checking is recommended. Contact your dealer for details.
● Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
● If the equipment is used in a manner not specified by the manufacturer, the protection provided by the device may be impaired.
Using Environment
● Make sure the running environment meets the requirement of the device. The operating temperature shall be -10°C to 55°C (walk
through metal door), 5°C to 40°C (speed dome)
,
and the operating humidity shall be 95% or less, no condensing.
● DO NOT expose the device to high electromagnetic radiation or dusty environments.
● DO NOT aim the lens at the sun or any other bright light.
Emergency
● If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service
center.
Manufacture Address
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Hangzhou Hikvision Digital Technology Co.,Ltd