User Manual

Arming Schedule and Alarm Linkage

Arming schedule is a customized time period in which the device performs certain tasks. Alarm linkage is the response to the detected

certain incident or target during the scheduled time.

Set the valid time of the device tasks.

Steps

1. Click Arming Schedule.

2. Drag the time bar to draw desired valid time.

Note

Up to 8 periods can be configured for one day.

3. Adjust the time period.

– Click on the selected time period, and enter the desired value. Click Save.

– Click on the selected time period. Drag the both ends to adjust the time period.

– Click on the selected time period, and drag it on the time bar.

4. Optional: Click Copy to... to copy the same settings to other days.

5. Click Save.

You can enable the linkage functions when an event or alarm occurs.

I. Trigger Alarm Output

If the device has been connected to an alarm output device, and the alarm output No. has been configured, the device sends alarm

information to the connected alarm output device when an alarm is triggered.

Steps

1. Go to Configuration → Event → Basic Event → Alarm Output.

2. Set alarm output parameters.

Automatic Alarm

For the information about the configuration, see Automatic Alarm.

Manual Alarm

For the information about the configuration, see Manual Alarm.

3. Click Save.

 Manual Alarm

You can trigger an alarm output manually.

Steps

1. Set the manual alarm parameters.

Alarm Output No.

Select the alarm output No. according to the alarm interface connected to the external alarm device.

Alarm Name

Custom a name for the alarm output.