User Manual

Caution

We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including at least

three of the following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the

security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting

the password monthly or weekly can better protect your product.

5. Click OK.

6. Input the activation password to log in to the device.

7. Optional: Go to Configuration → Network → Basic → TCP/IP to change the IP address of the device to the same segment of your

network.

I. Install Plug-in

You can access the device by installing plug-in.

Steps

1. Input IP address of the device in web browser and the login window will pop up.

2. Install the plug-in according to the prompt.

3. Open the web browser again and input IP address of the device.

4. Input user name and password, and click Login.

Help

Get online help document of the device.

Logout

You can exit safely.

II. Illegal Login Lock

It helps to improve the security when accessing the device via Internet.

The admin user can set the login attempts with the wrong password. When your login attempts with the wrong password reach the

set times, the device is locked.

Go to Configuration → System → Security → Security Service, and enable Enable Illegal Login Lock, and set the illegal login attempts.