User Manual

10
The maximum distance between the electronic interference source and the receiving coil should be maximum. The recommended
minimum distance is 0.5-4m (20-157in). However, the actual distance should vary according to the specific situation.
The Interference may be caused by electronic control panel, radio equipment and computer, image display, high-power motor and
transformer, AC wire, transistor control circuit, flash fluorescent lamp, ARC welding equipment, etc.
Connecting the power cable to a circuit that is not connected with other large load equipment may cause voltage shock.
The recommended min. distance away from the interference source:
A. With fixed metal object
B. No moving metal object is allowed
C. No electronic interference source is allowed