Installation Guide

High Performance Event Detection Server • Installation Guide
9
Install Outer Rail
Select a 1 U space in the bracket. Install the equipped M5 caged nuts with 6 in the front and
4 in the back to the inner side of bracket.
Assemble the front half and back half of the outer rail.
Drag out the back half of the outer rail (marked with back) and adjust the length.
Fix the front half (marked with front) and back half of the outer rail in the front and rear
bracket by 2 groups of 10 M5 screws and cup washer.
Repeat above steps to fix another side.
The two sides of outer rail should be parallel.
Install Outer Rail
Install Bracket
Check the inner rail is properly fixed in the two sides of chassis, and outer rail is properly
fixed in bracket.
Align the inner rail with the outer rail.
Align Inner Rail With Outer Rail