User Manual

Network Traffic Camera • User Manual
3
Safety Instructions
Laws and
Regulations
Use of the product must be in strict compliance with the local laws and
regulations. Please shut down the device in prohibited area.
Power Supply

Use of the product must be in strict compliance with the local electrical
safety regulations.

Use the power adapter provided by qualified manufacturer. Refer to the
product specification for detailed power requirements.

It is recommended to provide independent power adapter for each
device as adapter overload may cause over-heating or a fire hazard.

Make sure that the power has been disconnected before you wire,
install, or disassemble the device.

DO NOT directly touch exposed contacts and components once the
device is powered up to avoid electric shock.

DO NOT use damaged power supply devices (e.g., cable, power adapter,
etc.) to avoid electric shock, fire hazard, and explosion.

DO NOT directly cut the power supply to shut down the device. Please
shut down the device normally and then unplug the power cord to avoid
data loss.

DO NOT block the power supply equipment to plug and unplug
conveniently.

Make sure the power supply has been disconnected if the power
adapter is idle.

Make sure the device is connected to the ground firmly.
Symbol
Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.