User's Manual

Network Video Recorder User Manual
95
Event and Alarm Settings and Chapter 12 VCA Event Alarm for details.
Configure Continuous Recording
Go to Camera > Video Parameters.
Set the continuous main stream/sub-stream recording parameters for the camera.
Go to Storage > Schedule > Record.
Select the record type to Continuous.
Set the schedule for the continuous recording. Refer to Chapter 7.4 Configure Recording
Schedule for details.
Configure Motion Detection Triggered Recording
You can configure the recording triggered by the motion detection event.
Go to System > Event > Normal Event > Motion Detection.
Configure the motion detection and select the channel (s) to trigger the recording when
motion event occurs. Refer to Chapter 11.2 Configure Alarm Linkage Actions for details.
Go to Camera > Video Parameters.
Set the event main stream/sub-stream recording parameters for the camera.
Go to Storage > Schedule > Record.
Select the record type to Motion.
Set the schedule for the motion detection triggered recording. Refer to Chapter 7.4
Configure Recording Schedule for details.
Configure Event Triggered Recording
You can configure the recording triggered by the motion detection, motion detection and alarm,
facial detection, vehicle detection, line crossing detection, etc.
Go to System > Event.
Configure the event detection and select the channel (s) to trigger the recording when event
occurs. Refer to Chapter 11 Event and Alarm Settings and Chapter 12 VCA Event Alarm for
details.
Go to Camera > Video Parameters.
Set the event main stream/sub-stream recording parameters for the camera.
Go to Storage > Schedule > Record.