User's Manual
Table Of Contents
- Chapter 1 Introduction
- 1.1 Front Panel
- 1.1.1 iDS-9600NXI-I8/8F(B), iDS-9600NXI-I8/X(B) and iDS-9600NXI-I8/16S(B) Series
- 1.1.2 iDS-9600NXI-I16/8F(B), iDS-9600NXI-I16/X(B) and iDS-9600NXI-I16/16S(B) Series
- 1.1.3 iDS-7700NXI-I4(/16P)/16S(B) and iDS-7700NXI-I4(/16P)/X(B) Series
- 1.1.4 iDS-6700NXI-I/8F(B) and iDS-6700NXI-I/16S(B) Series
- 1.1.5 iDS-9600NXI-I8/4F(B)
- 1.1.6 iDS-96000NXI-I16(B)
- 1.1.7 iDS-96000NXI-I24(B)
- 1.2 IR Remote Control Operations
- 1.3 USB Mouse Operation
- 1.4 Rear Panel
- 1.4.1 iDS-9600NXI-I8/8F(B), iDS-9600NXI-I8/X(B) and iDS-9600NXI-I8/16S(B) Series
- 1.4.2 iDS-9600NXI-I16/8F(B), iDS-9600NXI-I16/X(B) and iDS-9600NXI-I16/16S(B) Series
- 1.4.3 iDS-7700NXI-I4(/16P)/16S(B) and iDS-7700NXI-I4(/16P)/X(B) Series
- 1.4.4 iDS-6700NXI-I/16S(B) and iDS-6700NXI-I/8F(B) Series
- 1.4.5 iDS-9600NXI-I8/4F(B)
- 1.4.6 iDS-96000NXI-I16(B) and iDS-96000NXI-I24(B)
- 1.1 Front Panel
- Chapter 2 Getting Started
- Chapter 3 Camera Management
- Chapter 4 Camera Settings
- Chapter 5 Live View
- Chapter 6 PTZ Control
- Chapter 7 Storage
- 7.1 Storage Device Management
- 7.2 Storage Mode
- 7.3 Recording Parameters
- 7.4 Configure Recording Schedule
- 7.5 Configure Continuous Recording
- 7.6 Configure Motion Detection Triggered Recording
- 7.7 Configure Event Triggered Recording
- 7.8 Configure Alarm Triggered Recording
- 7.9 Configure Picture Capture
- 7.10 Configure Holiday Recording
- 7.11 Configure Redundant Recording
- Chapter 8 Disk Array
- Chapter 9 File Management
- Chapter 10 Playback
- Chapter 11 Event and Alarm Settings
- Chapter 12 VCA Event Alarm
- 12.1 Facial Detection
- 12.2 Vehicle Detection
- 12.3 Line Crossing Detection
- 12.4 Intrusion Detection
- 12.5 Region Entrance Detection
- 12.6 Region Exiting Detection
- 12.7 Unattended Baggage Detection
- 12.8 Object Removal Detection
- 12.9 Audio Exception Detection
- 12.10 Sudden Scene Change Detection
- 12.11 Defocus Detection
- 12.12 PIR Alarm
- 12.13 Thermal Camera Detection
- Chapter 13 Smart Analysis
- Chapter 14 Human Body Detection
- Chapter 15 Face Picture Comparison
- Chapter 16 People Frequency Alarm
- Chapter 17 Network Settings
- Chapter 18 Hot Spare Device Backup
- Chapter 19 System Maintenance
- Chapter 20 General System Settings
- Chapter 21 Appendix
Network Video Recorder User Manual
44
8
KB
Keyboard interface.
9
ALARM IN/OUT
Connector for alarm input/output.
10
GND
Ground (needs to be connected when NVR starts up).
11
Power Supply
100 to 240 VAC power supply.
12
AUDIO IN
RCA connector for audio input.
13
eSATA
Connects external SATA HDD, CD/DVD-RM.
14
VGA
DB9 connector for VGA output. Display local video
output and menu.
15
RS-232 Interface
Connector for RS-232 devices.
16
Extension Board
4 RJ45 10/100/1000 Mbps self-adaptive optical
interface, 8 × RS-485 (full-duplex), Alarm input/output:
32/16.