User's Manual

Network Video Recorder User Manual
182
The device must be connected to a local area network (LAN) that contains an SMTP mail server.
The network must also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send notification.
Go to System > Network > Advanced > Email.
Email Settings
Configure the following Email settings.
● Enable Server Authentication: Check to enable the function if the SMTP server requires user
authentication and enter user name and password accordingly.
● SMTP Server: The IP address of SMTP Server or host name (e.g., smtp.263xmail.com).
● SMTP Port: The SMTP port. The default TCP/IP port used for SMTP is 25.
● Enable SSL/TLS: Check to enable SSL/TLS if required by the SMTP server.
● Sender: The name of the sender.
● Sender's Address: Sender's Address.
● Select Receivers: Select the receiver. Up to 3 receivers can be configured.
● Receiver: The name of the receiver.
● Receiver's Address: The Email address of user to be notified.
● Enable Attached Picture: Check to enable the function if you want to send email with attached
alarm images. The interval is the time between two adjacent alarm images.
Click Apply.
(Optional) Click Test to send a test email.