User's Manual

Network Video Recorder User Manual
152
FIR Alarm
Select a Camera to configure.
Check PIR Alarm.
(Optional) Check Save VCA Picture to save the captured pictures of PIR alarm.
Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
.Click Apply.
Thermal Camera Detection
The NVR supports the event detection modes of the thermal network cameras: fire and smoke
detection, temperature detection, temperature difference detection, etc.
Before you start
Add the thermal network camera to your device and make sure the camera is activated.
Go to System > Event > Smart Event.
Select a thermal camera from the camera list.
(Optional) Check Save VCA Picture to save the captured pictures of detection.
Click an event detection (Temperature A, Temperature, etc.).
Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.