User's Manual
Table Of Contents
- Chapter 1 Introduction
- 1.1 Front Panel
- 1.1.1 iDS-9600NXI-I8/8F(B), iDS-9600NXI-I8/X(B) and iDS-9600NXI-I8/16S(B) Series
- 1.1.2 iDS-9600NXI-I16/8F(B), iDS-9600NXI-I16/X(B) and iDS-9600NXI-I16/16S(B) Series
- 1.1.3 iDS-7700NXI-I4(/16P)/16S(B) and iDS-7700NXI-I4(/16P)/X(B) Series
- 1.1.4 iDS-6700NXI-I/8F(B) and iDS-6700NXI-I/16S(B) Series
- 1.1.5 iDS-9600NXI-I8/4F(B)
- 1.1.6 iDS-96000NXI-I16(B)
- 1.1.7 iDS-96000NXI-I24(B)
- 1.2 IR Remote Control Operations
- 1.3 USB Mouse Operation
- 1.4 Rear Panel
- 1.4.1 iDS-9600NXI-I8/8F(B), iDS-9600NXI-I8/X(B) and iDS-9600NXI-I8/16S(B) Series
- 1.4.2 iDS-9600NXI-I16/8F(B), iDS-9600NXI-I16/X(B) and iDS-9600NXI-I16/16S(B) Series
- 1.4.3 iDS-7700NXI-I4(/16P)/16S(B) and iDS-7700NXI-I4(/16P)/X(B) Series
- 1.4.4 iDS-6700NXI-I/16S(B) and iDS-6700NXI-I/8F(B) Series
- 1.4.5 iDS-9600NXI-I8/4F(B)
- 1.4.6 iDS-96000NXI-I16(B) and iDS-96000NXI-I24(B)
- 1.1 Front Panel
- Chapter 2 Getting Started
- Chapter 3 Camera Management
- Chapter 4 Camera Settings
- Chapter 5 Live View
- Chapter 6 PTZ Control
- Chapter 7 Storage
- 7.1 Storage Device Management
- 7.2 Storage Mode
- 7.3 Recording Parameters
- 7.4 Configure Recording Schedule
- 7.5 Configure Continuous Recording
- 7.6 Configure Motion Detection Triggered Recording
- 7.7 Configure Event Triggered Recording
- 7.8 Configure Alarm Triggered Recording
- 7.9 Configure Picture Capture
- 7.10 Configure Holiday Recording
- 7.11 Configure Redundant Recording
- Chapter 8 Disk Array
- Chapter 9 File Management
- Chapter 10 Playback
- Chapter 11 Event and Alarm Settings
- Chapter 12 VCA Event Alarm
- 12.1 Facial Detection
- 12.2 Vehicle Detection
- 12.3 Line Crossing Detection
- 12.4 Intrusion Detection
- 12.5 Region Entrance Detection
- 12.6 Region Exiting Detection
- 12.7 Unattended Baggage Detection
- 12.8 Object Removal Detection
- 12.9 Audio Exception Detection
- 12.10 Sudden Scene Change Detection
- 12.11 Defocus Detection
- 12.12 PIR Alarm
- 12.13 Thermal Camera Detection
- Chapter 13 Smart Analysis
- Chapter 14 Human Body Detection
- Chapter 15 Face Picture Comparison
- Chapter 16 People Frequency Alarm
- Chapter 17 Network Settings
- Chapter 18 Hot Spare Device Backup
- Chapter 19 System Maintenance
- Chapter 20 General System Settings
- Chapter 21 Appendix
Network Video Recorder User Manual
143
2) Draw an area in preview window.
3) Click Stop Drawing.
Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Click Apply.
Region Entrance Detection
Purpose:
Region entrance detection function detects objects that enter a pre-defined virtual region from the
outside place.
Go to System Management > Event Settings > Smart Event.
Select a Camera to configure.
Click Region Entrance Detection.
Region Entrance Detection
Check Enable Region Entrance Detection.
(Optional) Check Save VCA Picture to save the captured pictures of region entrance
detection.
Select Target of Interest as Human Body or Vehicle to discard region entrance pictures and
video files which are not triggered by human body or vehicle.