User's Manual

Network Video Recorder User Manual
9
● HDD property: Redundancy, read-only, read/write (R/W).
● HDD quota management; different capacity can be assigned to different channel.
● RAID0, RAID1, RAID5, RAID6 and RAID 10 are supported.
● Hot-swappable RAID storage scheme, and can be enabled and disabled on your demand. And
16 arrays can be configured.
● Disk clone to the eSATA disk.
● HDD health monitoring.
Recording, Capture and Playback
● Holiday recording schedule configuration.
● Continuous and event video recording parameters.
● Multiple recording types: Manual, continuous, alarm, motion, motion | alarm, motion &
alarm, and VCA.
● 8 recording time periods with separated recording types.
● Pre-record and post-record for alarm, motion detection for recording, and pre-record time for
schedule and manual recording.
● Searching record files by events (alarm input/motion detection).
● Tag adding for record files, searching and playing back by tags.
● Locking and unlocking record files.
● Local redundant recording.
● Normal/important/custom video playback mode.
● Searching and playing back record files by channel number, recording type, start time, end
time, etc.
● Supports the playback by main stream or sub stream.
● Smart search for the selected area in the video.
● Zooming in when playback.
● Reverse playback of multi-channel.
● Supports pause, play reverse, speed up, speed down, skip forward, and skip backward when
playback, and locating by dragging the mouse.
● Supports thumbnails view and fast view during playback.
● Up to 16-ch synchronous playback at 1080p real time.
● Supports playback by transcoded stream.
● Supports enabling H.264+ to ensure high video quality with lowered bitrate.
Files Management
● Important files search and export.
● Vehicle detection files and human appearance files search and export.
● Export video data by USB, SATA or eSATA device.