User Manual

Table Of Contents
Steps
1. Go to
Conguraon → VCA → Behavior Analysis .
2. Select a camera.
3. Check Enable Local VCA Behavior Analysis, and the device will analyze the video, cameras only
transmit video stream.
4. Set Behavior Analysis Subtype as Street Behavior Analysis.
5. Set rules and
detecon areas.
1) Click to add a rule.
2) Select Rule Type as Violent Moon Detecon.
3) Enter the rule name.
4) Enable the rule.
5) Set the
duraon me. It will trigger the alarm when the me exceeds the limit.
6) Set Sensivity. The higher the sensivity, the easier the alarm will be triggered.
7) Set Alarm Interval. Alarm interval is the shortest me interval between two alarms.
8)
Oponal: Check Overlay Rule Frame or Overlay Target Frame, the rule frame or target frame
will be displayed on the captured picture.
9) Click
to draw the detecon area in the preview window.
10)Click Save.
Network Video Recorder User Manual
80