User Manual

Table Of Contents
Steps
1. Go to
Conguraon → VCA → Behavior Analysis .
2. Select a camera.
3. Check Enable Local VCA Behavior Analysis, and the device will analyze the video, cameras only
transmit video stream.
4. Set Behavior Analysis Subtype as Street Behavior Analysis.
5. Set rules and
detecon areas.
1) Click to add a rule.
2) Select Rule Type as People Running Detecon.
3) Enter the rule name.
4) Enable the rule.
5) Set the
duraon me. It will trigger the alarm when the me exceeds the limit.
6) Set Mode.
Mulple Persons Mode
When mulple persons are running in the detecon area, the device will trigger an alarm.
Single Person Mode
When a single persons is running in the detecon area, the device will trigger an alarm.
7) Set
Sensivity. The higher the sensivity, the easier the alarm will be triggered.
8) Oponal: Check Overlay Rule Frame or Overlay Target Frame, the rule frame or target frame
will be displayed on the captured picture.
9) Click
to draw the detecon area in the preview window.
10)Click Save.
Network Video Recorder User Manual
78