User Manual

2. Select a camera.
3. Check Enable Local VCA Behavior Analysis, and the device will analyze the video, cameras only
transmit video stream.
4. Set Behavior Analysis Subtype as Work Behavior Analysis.
5. Set rules and
detecon areas.
1) Click to add a rule.
2) Enter the rule name.
3) Enable the rule.
4) Set the
duraon me. It will trigger the alarm when the me exceeds the limit.
5) Oponal: Check Overlay Rule Frame or Overlay Target Frame, the rule frame or target frame
will be displayed on the captured picture.
6) Click
to draw the detecon area in the preview window.
7) Click Save.
Figure 6-5 Using Mobile Phone Detecon
6. Set the arming schedule. Refer to Congure Arming Schedule .
7. Set linkage
acons. Refer to Congure Linkage Acons .
8. Click Save.
Network Video Recorder User Manual
75