User Manual

Table Of Contents
Steps
1. Go to
Conguraon → VCA → Behavior Analysis .
2. Select a camera.
3. Check Enable Local VCA Behavior Analysis, and the device will analyze the video, cameras only
transmit video stream.
4. Set Behavior Analysis Subtype as Work Behavior Analysis.
5. Set rules and
detecon areas.
1) Click to add a rule.
2) Select Rule Type as Number of People Excepon Detecon.
3) Enter the rule name.
4) Enable the rule.
5) Set the
duraon me. It will trigger the alarm when the me exceeds the limit.
6) Oponal: Check Overlay Rule Frame, the rule frame will be displayed on the captured
picture.
7) Set Mode.
8) Click
to draw the detecon area in the preview window.
9) Click Save.
Network Video Recorder User Manual
73