User Manual

3. Select the patrol No.
4. Click Set.
Figure 3-11 Patrol Sengs
5. Click to add a key point to the patrol.
Figure 3-12 Key Point Conguraon
1)
Congure key point parameters.
Preset
Determines the order the PTZ will follow while cycling through the patrol.
Speed
Denes the speed the PTZ will move from one key point to the next.
Duraon
Refers to the duraon to stay at the corresponding key point.
2) Click Apply to save the key points to the patrol.
6. Other
Operaon is as follows.
Network Video Recorder User Manual
26