User Manual

ManualsBrandsHikvision ManualsIP Products32-ch 2U 4K DeepinMind NVR

Table Of Contents

Legal Information
Regulatory Information
Applicable Model
Symbol Conventions
Safety Instruction
Preventive and Cautionary Tips
Chapter 1 Basic Operation
- 1.1 Activate Your Device
- 1.2 Configure TCP/IP Settings
- 1.3 HDD Settings
- 1.4 Add Network Camera
- 1.5 Platform Access
  - 1.5.1 Configure Guarding Vision
Chapter 2 Camera Settings
- 2.1 Configure Image Parameters
- 2.2 Configure OSD Settings
- 2.3 Configure Privacy Mask
- 2.4 IP Camera Time Sync
- 2.5 Import/Export IP Camera Configuration Files
- 2.6 Upgrade IP Cameras
Chapter 3 Live View
- 3.1 Start Live View
  - 3.1.1 Configure Live View Settings
  - 3.1.2 Configure Live View Layout
    - Configure Custom Live View Layout
    - Configure Live View Mode
- 3.2 Configure Auto-Switch of Cameras
- 3.3 Digital Zoom
- 3.4 Fisheye View
- 3.5 POS Information Overlay
- 3.6 3D Positioning
- 3.7 Live View Strategy
- 3.8 Configure Channel-Zero Encoding
- 3.9 Main and Auxiliary Ports Strategy
- 3.10 PTZ Control
Chapter 4 Recording and Playback
- 4.1 Recording
- 4.2 Playback
- 4.3 Playback Operations
Chapter 5 Event
- 5.1 Normal Event Alarm
- 5.2 VCA Event Alarm
- 5.3 Configure Arming Schedule
- 5.4 Configure Linkage Actions
Chapter 6 Smart Analysis
- 6.1 Engine Configuration
- 6.2 Work Behavior Analysis
- 6.3 Street Behavior Analysis
- 6.4 Not Wearing Hard Hat Detection
- 6.5 Face Picture Library Management
  - 6.5.1 Add a Face Picture Library
  - 6.5.2 Upload Face Pictures to the Library
- 6.6 Perimeter Protection
- 6.7 Smart Search
- 6.8 Target Detection
- 6.9 People Counting
- 6.10 Heat Map
Chapter 7 File Management
- 7.1 Search Files
- 7.2 Export Files
- 7.3 Smart Search
Chapter 8 POS Configuration
- 8.1 Configure POS Connection
- 8.2 Configure POS Text Overlay
- 8.3 Configure POS Alarm
Chapter 9 Storage
- 9.1 Storage Device Management
- 9.2 Disk Array
  - 9.2.1 Create a Disk Array
    - One-Touch Creation
    - Manual Creation
  - 9.2.2 Rebuild an Array
Chapter 10 Hot Spare Recorder Backup
- 10.1 Set Hot Spare Device
- 10.2 Set Working Recorder
- 10.3 Manage Hot Spare System
Chapter 11 Network Settings
- 11.1 Configure DDNS
- 11.2 17.3 Configure PPPoE
- 11.3 Configure Port Mapping (NAT)
- 11.4 Configure SNMP
- 11.5 Configure Email
- 11.6 Configure Port
- 11.7 Configure ONVIF
Chapter 12 User Management and Security
- 12.1 Manage User Accounts
- 12.2 Manage User Permissions
  - 12.2.1 Set User Permissions
  - 12.2.2 Set Live View Permission on Lock Screen
- 12.3 Configure Password Security
  - 12.3.1 Export GUID File
  - 12.3.2 Configure Security Questions
- 12.4 Reset Password
  - 12.4.1 Reset Password by GUID
  - 12.4.2 Reset Password by Security Questions
Chapter 13 System Management
- 13.1 Configure Device
- 13.2 Configure Time
- 13.3 Network Detection
- 13.4 Storage Device Maintenance
- 13.5 Upgrade Device
- 13.6 Import/Export Device Configuration Files
- 13.7 Search & Export Log Files
- 13.8 Restore Default Settings
- 13.9 Security Management
Chapter 14 Appendix
- 14.1 Glossary
- 14.2 Frequently Asked Questions

2) Scan the QR code to read the service terms and privacy statement.

3) Check The Guarding Vision service will require internet access. Please read Service Terms

and Privacy Statement before enabling the service if you agree the service terms and

privacy statement.

4) Click OK.

Note

• Guarding Vision is disabled by default.

• The

vericaon code is empty by default. It must contain 6 to 12 leers or numbers, and it is

case sensive.

3. Oponal: Congure following parameters.

• Check Custom and enter Server Address as your desire.

• Check Enable Stream

Encrypon, vericaon code is required for remote access and live

view.

• Click Unbind if your video recorder requires to unbind with the current Guarding Vision

account.

4. Click Apply.

What to do next

You can access and manage your video recorder through Guarding Vision app or .

Network Video Recorder User Manual