User Manual

R/W
HDD supports both read and write.
Read-only
Files in read-only HDD will not be overwrien.
Redundant
Save the videos and pictures not only in the R/W HDD but also in the redundant HDD. It
eecvely enhances the data safety and reliability. Ensure at least another HDD which is in
Read/Write status exists.
4. Click OK.
Congure
the HDD Quota
Each camera can be congured with an allocated quota for storing videos or pictures.
Steps
1. Go to Storage → Storage Mode .
2. Select Mode as Quota.
3. Select a camera to set quota.
4. Enter the storage capacity in the text
elds of Max. Record Capacity (GB) and Max. Picture
Capacity (GB).
5. Click Copy to to copy the quota
sengs of the current camera to other cameras.
6. Click Apply.
Note
• When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos
and pictures.
• Reboot the video recorder to acvate the new sengs.
9.1.2 Add a Network Disk
You can add the allocated NAS or IP SAN disk to the device, and use it as a network HDD. Up to 8
network disks can be added.
Steps
1. Go to Storage → Storage Device .
2. Click Add.
Network Video Recorder User Manual
110