User Manual

Steps
1. Go to System Management → Event
Sengs → Smart Event .
2. Click Region Entrance
Detecon.
Figure 6-13 Region Entrance Detecon
3. Select a camera.
4. Check Enable Region Entrance
Detecon.
5. Oponal: Check Save VCA Picture to save the captured pictures of region entrance detecon
pictures.
6. Set detecon rules and detecon areas.
1) Select Arming Region. Up to 4 regions are selectable.
2) Set
Sensivity. The higher the value is, the easier the detecon alarm will be triggered. Its
range is [0-100].
3) Click Draw Region, and draw a quadrilateral in the preview window.
7. Set the arming schedule. Refer to
Congure Arming Schedule .
8. Set linkage
acons. Refer to Congure Linkage Acons .
9. Click Apply.
6.6.4 Region
Exing Detecon
Region exing detecon detects objects that exit from a predened virtual region.
Steps
1. Go to System → Event → Smart Event .
2. Click Region Exing.
Network Video Recorder User Manual
89