User Manual

Figure 6-12 Intrusion Detecon
3. Check Enable Intrusion Detecon.
4.
Oponal: Check Save VCA Picture to save the captured intrusion detecon pictures.
5. Set the detecon rules and detecon areas.
1) Select a virtual panel. Up to 4 virtual panels are selectable.
2) Set Time Threshold, and
Sensivity.
Time Threshold
The
me an object loiter in the region. When the duraon of the object in the dened
detecon area exceeds the threshold, the device will trigger an alarm.
Sensivity
The size of the object that can trigger the alarm. The higher the value is, the more easily
the
detecon alarm will be triggered.
3) Click Draw Area.
4) Draw a quadrilateral in the preview window.
6.
Oponal: Draw the maximum size/minimum size for targets. Only the targets in the size ranging
from max.size to min. size will trigger line crossing detecon.
1) Click Max. Size/Min. Size.
2) Draw an area in preview window.
3) Click Stop Drawing.
7. Set the arming schedule. Refer to
Congure Arming Schedule .
8. Set linkage
acons. Refer to Congure Linkage Acons .
9. Click Apply.
6.6.3 Region Entrance
Detecon
Region entrance detecon detects objects that enter a predened virtual region.
Network Video Recorder User Manual
88