User Manual

1) Select an arming area.
2) Select Direcon as A<->B, A->B, or A<-B.
A<->B
Only the arrow on the B side shows. When an object goes across the congured line with
both direcons can be detected and alarms are triggered.
A->B
Only the object crossing the
congured line from the A side to the B side can be detected.
B->A
Only the object crossing the congured line from the B side to the A side can be detected.
3) Set the detecon sensivity. The higher the value is, the more easily the detecon alarm can
be triggered.
4) Click Draw Region.
5) Draw a virtual line in the preview window.
7.
Oponal: Draw the maximum size/minimum size for targets. Only the targets in the size ranging
from max.size to min. size will trigger line crossing detecon.
1) Click Max. Size/Min. Size.
2) Draw an area in preview window.
3) Click Stop Drawing.
8. Set the arming schedule. Refer to Congure Arming Schedule .
9. Set linkage
acons. Refer to Congure Linkage Acons .
10. Click Apply.
6.6.2 Intrusion
Detecon
The Intrusion detecon funcon detects people, vehicles or other objects that enter and loiter in a
pre-dened virtual region. Specic acons can be taken when an alarm is triggered.
Steps
1. Go to System → Event → Smart Event .
2. Click Intrusion.
Network Video Recorder User Manual
87