User Manual

ATM Digital Video Recorder User Manual
89
2) Select Group number in the drop-down list of Record on HDD Group
3) Check the channels you want to save in this group.
4) Click Apply to save settings.
After you have configured the HDD groups, you can configure the recording settings following the
procedure provided in Chapter 5.2-5.7.
5.10 Files Protection
Purpose
You can lock the recorded files or set the HDD property to Read-only to protect the record files
from being overwritten.
Protecting file by locking the record files
Step 1 Enter Export Settings interface.
Menu> Export
Figure 5-34 Export
Step 2 Select the channels you want to investigate by checking the checkbox.
Step 3 Configure the record mode, record type, file type, start time and end time.
Step 4 Click Search to show the results.