User Manual

ATM Digital Video Recorder User Manual
70
Figure 5-3 Record Parameters
Step 2 Set the parameters for recording.
1) Select the Record tab to configure.
2) Select a camera from the camera drop-down list.
3) View the Camera Resolution.
4) Configure the following parameters for the Main Stream (Continuous) and the Main
Stream (Event).
Stream Type: Set the stream type to be Video or Video & Audio.
Resolution: Set recording resolution.
Up to 3 MP resultion is supported for the analog channels.
Bitrate Type: Set the bitrate type to be Variable or Constant.
Video Quality: Set the video quality of recording, with 6 levels configurable.
The Stream Type, Resolution, Bitrate Type and Video Quality are not configurable for the Main
Stream (Event) of the IP Camera.
Frame Rate: Set the frame rate of recording.
When 3 MP analog signal input is connected, the frame rate of the main stream is 15 fps under any
resolution.
Max. Bitrate Mode: Set the mode to General or Custom.