User Manual

ATM Digital Video Recorder User Manual
50
Table 3-3 Mouse Operation in Live View
Name
Description
Menu
Enter the main menu of the system by right-clicking the mouse.
Single Screen
Switch to the single full screen by choosing channel number from the
drop-down list.
Multi-Screen
Adjust the screen layout by selecting from the drop-down list.
Previous Screen
Switch to the previous screen.
Next Screen
Switch to the next screen.
Start/Stop
Auto-Switch
Enable/disable the auto-switch of the screens.
The dwell time of the live view configuration must be set before using
Start Auto-Switch.
Start Recording
Start recording of all channels, Continuous Record and Motion Detection
Record are selectable from the drop-down list.
Add IP Camera
A shortcut to enter the IP camera management interface.
Playback
Enter the playback interface and start playing back the video of the
selected channel immediately.
PTZ Control
A shortcut to enter the PTZ control interface of the selected camera.
Output Mode
Output Mode is configurable with Standard, Bright, Gentle and Vivid
options.
Aux Monitor
Switch to the auxiliary output mode and the operation for the main
output is disabled.
If you enter Aux monitor mode and the Aux monitor is not connected, the
mouse operation is disabled. You need to switch back to the Main output
with the F1 button on front panel or VOIP/MON button on IR remote
control and then press the Enter button.