User Manual

ATM Digital Video Recorder User Manual
49
 Start Auto-switch: the screen is auto switched to the next one. And you must set the dwell
time for each screen on the configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>Dwell Time.
 Start Recording: normal record and motion detection record are supported.
 Add IP Camera: the shortcut to the IP camera management interface.
 Output Mode: select the output mode to Standard, Bright, Gentle or Vivid.
 Playback: play back the recorded videos for current day.
 Aux/Main Monitor: the DVR checks the connection of the output interfaces to define the
main and auxiliary output interfaces. When the aux output is enabled, the main output cannot
do any operation, and you can do some basic operation on the live view mode for the aux
output.
For DS-8104AHQLI-E4 and iDS-8104AHQXLI-E4, the main output priority is HDMI/VGA > LCD.
For DS-8104AHQI-E4, the main output is HDMI/VGA. The priority relationship is shown as
Table 3-2.
Table 3-2 Priorities of Outputs
Model
HDMI/VGA
CVBS
Main
output
Auxiliary
output
DS-8104AHQLI-E4/iDS-8104AHQXLI-E4
√
√/×
HDMI/VGA
LCD
×
√/×
LCD
HDMI/VGA
DS-8104AHQI-E4
√
√/×
HDMI/VGA
×
√/×
HDMI/VGA

√ means the interface is in use, × means the interface is out of use or the connection is
invalid.

The HDMI, VGA and main CVBS can be used at the same time.

The main CVBS output does not support menu display.
 Display/Hide Transaction Information: display/hide the transaction information including the
transaction card No., transaction amount, transaction behavior on the live view window.
3.2.1 Using the Mouse in Live View
You can refer to Table 3-4 for the description of mouse operation in live view mode.