User Manual

ATM Digital Video Recorder User Manual
46
 Enable Sub-stream: If the network camera does not support sub-stream or the
sub-stream is not needed, leave the checkbox empty.
 Type: The network camera adopting custom protocol must support getting stream
through standard RTSP.
 Transfer Protocol: Select the transfer protocol for the custom protocol.
 Port: Set the port No. for the custom protocol.
 Path: Set the resource path for the custom protocol. E.g., ch1/main/av_stream.
Before customizing the protocol for the network camera, you have to contact the manufacturer of
the network camera to consult the URL (uniform resource locator) for getting main stream and
sub-stream.
Example: The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path]. E.g.,
rtsp://192.168.1.55:554/ch1/main/av_stream.
Step 3 Click Apply to save the settings and click OK to exit.
After added successfully, the custom protocol will be displayed in the drop-down list of
protocol on the Custom Adding interface.
2.9 Configuring Signal Input Channel
Purpose
You can configure the analog and IP signal input types and the connectable maximum IP camera
number.
Step 1 Enter the Signal Input Status interface.
Menu > Camera > Signal Input Status
Figure 2-43 View Signal Input Type
Step 2 Check the checkbox to select different signal input types: HD/CVBS and IP.