User Manual
Table Of Contents
- Product Key Features
- Chapter 1 Introduction
- Chapter 2 Getting Started
- 2.1 Starting Up and Shutting Down the DVR
- 2.2 Activating the Device
- 2.3 Using the Unlock Pattern for Login
- 2.4 Basic Configuration in Startup Wizard
- 2.5 Login and Logout
- 2.6 Resetting Your Password
- 2.7 Adding and Connecting the IP Cameras
- 2.8 Configuring Custom Protocols
- 2.9 Configuring Signal Input Channel
- Chapter 3 Live View
- Chapter 4 PTZ Controls
- Chapter 5 Recording and Capture Settings
- 5.1 Configuring Encoding Parameters
- 5.2 Configuring Recording and Capture Schedule
- 5.3 Configuring Motion Detection Recording and Capture
- 5.4 Configuring Alarm Triggered Recording and Capture
- 5.5 Configuring Command Triggered Recording and Capture
- 5.6 Configuring Manual Recording and Continous Capture
- 5.7 Configuring Holiday Recording and Capture
- 5.8 Configuring Redundant Recording and Capture
- 5.9 Configuring HDD Group
- 5.10 Files Protection
- 5.11 One-Key Enabling and Disabling H.264+ for Analog Cameras
- Chapter 6 Playback
- 6.1 Playing Back Record Files
- 6.2 Auxiliary Functions of Playback
- Chapter 7 Backup
- Chapter 8 Alarm Settings
- Chapter 9 Smart ATM Settings
- Chapter 10 Network Settings
- Chapter 11 ATM Settings
- Chapter 12 RAID
- Chapter 13 HDD Management
- Chapter 14 Camera Settings
- Chapter 15 DVR Management and Maintenance
- Chapter 16 Others
- Chapter 17 Appendix
ATM Digital Video Recorder User Manual
221
17.3 Summary of Chnages
17.3.1 Version 3.4.83
Upgraded:
iDS-8104AHQXLI-E4 supports up to 4-ch smart ATM configuration of panel mode, environment
mode, human face mode, and safety cabin mode together; up to 2-ch human face mode, up to
2-ch safety cabin, or up to 1-ch human face mode and 1-ch safety cabin mode together. Panel
mode and environment mode can be enabled for all the cameras respectively.
Advanced parameters upgrade of smart ATM protection system. Refer to Quick Start Guide of
Smart ATM Protection System for details.
17.3.2 Version 3.4.82
Added:
New model: iDS-8104AHQXLI-E4
New functions for iDS-8104AHQXLI-E4：
Smart ATM record and capture.
Smart ATM alarm.
Playback by smart ATM alarm.
Four smart ATM modes are supported: panel mode, environment mode, human face mode,
and safety cabin mode. You can set rules and alarm response actions once the configured rule
is triggered.
17.3.3 Version 3.4.8
Added:
New functions for DS-8104AHQ(L)I-E4 series ATM DVR:
Connectable to HDTVI, IP and analog cameras.
Connectable to third-party IP cameras that adopt ONVIF or custom protocol.
The main stream supports up to 3 MP resolution.
Supports enabling H.264+ to ensure high video quality with lowered bit rate.
One-key enable or disable H.264+.
Night to day sensitivity, day to night sensitivity, and IR light brightness configurable for the
connected analog cameras supporting these parameters.
Simultaneous output of VGA and HDMI with up to 1080p resolution of VGA output and up to
4K (3840 × 2160) resolution of HDMI output.
Supports RAID 0, RAID 1, RAID 5, and RAID 10.
Unlock pattern for device login for the admin.