User Manual

ATM Digital Video Recorder User Manual
209
Menu >Configuration> RS-232
Figure 16-3 RS-232 Settings Interface
Step 2 Configure RS-232 parameters, including baud rate, data bit, stop bit, parity, flow control
and usage.
Step 3 Click Apply to save the settings.
16.3 Configuring DST Settings
Step 1 Enter the General Settings interface.
Menu >Configuration>General
Step 2 Choose DST Settings tab.
Figure 16-4 DST Settings Interface
You can check the checkbox before the Auto DST Adjustment item.
Or you can manually check the Enable DST checkbox, and then you choose the date of the
DST period.
16.4 Configuring More Settings
Step 1 Enter the General Settings interface.
Menu > Configuration > General
Step 2 Click the More Settings tab to enter the More Settings interface as shown below.