User Manual

ATM Digital Video Recorder User Manual
170
Figure 11-10 Custom Protocol Settings-Data Package
Step 2 Select the Data Format and then set the Start Tag for the data package.
Step 3 Select the Data Format and then set the End Tag for the data package.
Step 4 (Optional) Check the checkbox of Enable Filter, select the Data Format, input the Content
and set the Content Position to filter the specified contents.
Step 5 Click Apply to save the new settings and click OK to exit.
2 types of data format is selectable: ASCII and HEX. The start/end tag of the data package and the
content to be filtered should be set in the selected data format.
11.5.2 Configuring Transaction Information Settings
Purpose
The device can analyze the transaction information which is contained in the captured message,
including the card No., transaction behaviour, transaction amount and serial No.
Step 1 Click the Transaction Information tab to enter the Transaction Information Settings
interface.